VITEX™ 3D VEST
Vitex™ 3D Vest is a phoshate bonded, graphite free and very fine grain precision investment especially for partial denture frameworks made with “Rapid-Prototyping” technologies. 3D Vest is specially developed to burn out plastic frames made with Rapid-Prototyping resins.
3D Vest is usable for both the conventional and speed casting techniques and is suitable for casting all types of dental alloys (except Titanium).
Vitex™ 3D Vest is comparable to Whipmix ResinVest, Nobilium Cadvest, and Bego VarseoVest.
WHY CHOOSE 3D VEST?
- Designed for 3D Printed/Milled Wax and Plastic Scaffolding
- Superfine Grain, Creamy Consistency
- Very Smooth Casted Surfaces
- Divests Easily
[text-blocks id=”3732″]
Indication for use: Partial investment material designed for 3D Printed/Milled Wax and Plastic Scaffolding.
| Mixing Liquid | Investment Liquid |
| Mixing Ratio, Powder : Liquid | 100g : 20ml |
| Mixing Under Vacuum | 60 Seconds |
| Working Time | 4-5 Minutes |
| Recommended Storage/Working Temperature | Approx. 22ºC (Room Temperature) |
| Inital Setting Time | 7-10 Minutes |
| Setting Expansion | Approx. 1.00% (75% diluted type 100 liquid) |
| Preheating temp. range for placing in the furnace | 850-900ºC |
| Place in the hot furance | 25 min. after investing |
